All posts by RitzSafety

2016 Changes to Hand Safety Standards – New ANSI/ISEA 105 Needlestick Test Explained

Originally posted by HexArmor on 1/14/2016 and used with their permission.

While there are many standards in hand safety set by both the American ANSI/ISEA 105 and European EN388, one area has been completely missing: hypodermic needlestick protection.

Both the ANSI/ISEA 105 and EN388 provide a puncture test that uses a blunt probe to measure the amount of force required to puncture through a sample material/glove. However, until now, there has been no standard for hypodermic needlestick resistance. Many glove manufacturers use the puncture test to measure needlestick resistance, but due to the bluntness of the probe, the puncture test is inadequate for determining needlestick resistance and in no way represents of the danger of a hypodermic needle.

Effective February 2016, the ANSI/ISEA 105 standard will be updated and published to include the ASTM F2878-10 needlestick puncture test, recognizing that this is a common potential exposure risk for the medical, sanitation, and recycling industries.

Testing Method

The ASTM F2878-10 test method uses a 25 gauge needle to determine the force required to cause a hypodermic needle to penetrate through protective clothing or material. The puncture probe (25G needle) travels at a 90˚ angle into a specimen at a velocity of 500mm/min. Results are reported in Newtons and the average of a minimum of 12 specimens are used to report the classification level (1-5 scale).

HexArmor 9014 vs Competition (2)

HexArmor® Needlestick Protection

While the ASTM F2878 is a new standard for ANSI/ISEA 105, HexArmor® has used this test method for years as a performance metric for all of our needlestick resistant products. Our SuperFabric® Brand Material has consistently outperformed the competition in not only needlestick resistance, but also in cut protection, which is typically an equally-important attribute for the sanitation and recycling industries.

For more information on the products HexArmor offers, visit www.RitzSafety.com or call 800-451-3077.

Hand Protection: Cost Should No Longer Be The Deciding Factor

Written by Nick Collins, Marketing Director for Ritz Safety

Take a moment and consider this familiar scenario; You have been presented with two glove options for your workforce of about one hundred employees.  Glove option one features durable construction using a top grain leather with minimal dexterity and cut resistance, comes from a trusted glove manufacturer and costs only $8 per pair. Option B features a nitrile dipped Kevlar® shell for excellent cut resistance, superior dexterity and durability, good wet and dry grip and it can be laundered for extended use but is $12 per pair. Simple math says to go with option one, right? If you purchase just one pair per employee, your cost difference alone is $400 less. But what about the factors other than just cost?

As a Safety Manager, your focus is to find the best option for the task at hand while considering a variety of important factors. A 2013 study* from TriComB2B in partnership with the University of Dayton School of Business found that price dominated just 55% of all purchasing decisions. Instead, product features, benefits and even brand name are other attributes that are factored in on buying decisions. We no longer live and work in a cost-driven world. Instead, Safety Managers are looking for gloves that are dexterous, coated for an enhanced grip, and made with materials that are inherently cut resistant, in addition to other features, in an effort to increase worker safety. While cut resistance is an obvious component of elevated protection, the other two aspects should not be overlooked either. A glove that lacks dexterity may be removed to perform certain tasks, which removes the worker’s protection. An enhanced grip makes it less likely something will slip out of, or through the worker’s hands, which could cause a laceration. There are multiple variables to take into account for each job or task to ensure the overall protection meets workers’ needs. So let’s look at some of these additional factors that one may want to consider prior to making a purchasing decision.

Advancements in Glove Construction Technology

You may be asking “But aren’t these cut resistant gloves much more expensive than general purpose gloves?” Until very recently, that was the case. However, advancements in manufacturing processes and engineered yarn technology has allowed glove manufacturers to narrow this pricing gap dramatically. Engineered yarns optimize performance, function, and protection by blending select fibers to exceed industry standards. The ultimate objective has always been affordable cut resistant gloves for practically every application and now it can be provided for everyone, in every market.

Glove Coatings Provide Added Safety

Previously, construction workers were typically seen wearing those fabric/leather split palm gloves. However switching to coated seamless knits with engineered yarns enhances protection and allows workers to more securely hold power tools, handle sharp fasteners and sheet metal. Warehouse workers who often wear the economical general purpose gloves can now be more secure, even while handling those dangerous box cutters or razor sharp tape dispenser blades. With coated dipped gloves, workers can now keep their gloves on while performing all job tasks opposed to having to remove bulkier gloves to perform a task that requires more dexterity than they can get from their current glove. By removing their gloves, workers are put at greater risk of injury.

Dipped vs. Leather: Wear, Cut and Abrasion Resistance

Protective Industrial Products (PIP), a key supplier for Ritz Safety, recently tested a number of their dipped synthetic material gloves versus those made of natural materials. The information below demonstrate that the Cost of Ownership (CoO) for many synthetic gloves is lower than gloves made of natural materials. CoO is defined as the price of the glove divided by the number of rotations of the blade on a Taber Abrasion test machine required to wear through the glove material. The Taber Abrasion test is widely recognized as one of the most effective means of measuring a product’s durability. The test method used to gather this data was ASTM D 3389 – using 1,000 grams of weight on the abrasive wheel. Here is a summary of their observations about this data**:

  • Over time the CoO of leather is higher than using any other glove tested. Leather offers less protection and performance than synthetic options. The most expensive glove to wear based on the CoO is top grain leather…the test results illustrate 3 ½ times more costly than nitrile foam, seven times more than latex flat dipped and 11 times more than the CoO of coated Dyneema®.
  • The least expensive glove to wear based on the CoO is Dyneema®. The tested glove1 offers abrasion resistance that is 160 times that of a regular grade top grain leather glove.
  • The tested splash latex coated knit glove2 was found to be one third of the CoO of an economy split leather palm glove and offers almost twice the wear.
  • The tested crinkle finish latex coated knit3 offers 30% more protection from abrasion than a “B/C” grade split leather palm and costs only 25% more than the leather glove. This same glove also offers abrasion resistance that is three times that of a regular grade leather drivers and it is seven times more cost effective to own.
  • The tested economy crinkle finish latex coated knit4 provided almost twice the wear of the regular grade top grain leather glove and is eight times more cost effective to own.
  • The tested foam nitrile coated nylon knit5 will provide almost six times the wear of the “B/C” grade split leather palm and it is almost three time more cost effective to own. This same glove offers approximately three times more abrasion resistance than regular grade leather drivers while CoO of leather is over five times higher.

Just Turn It or Wash It

Another factor to consider is whether the gloves you are considering can be worn on either hand or machined wash. By having the capability to be worn on either the left or right hand, wearers have essentially doubled the life of the glove. Some machined knit gloves also feature the benefit of being able to be machined washed. This enables many of the contaminants the gloves have picked up during use, whether dirt and debris, chemicals, or other types of foreign particles, to be washed from the gloves and returned back to near-new characteristics. In either case, factoring in these life-extending capabilities should be factored into your overall glove costs. (Two items of note: 1) If you or your employees are washing the gloves, or you have an outside laundering company handling this, additional fees for laundering, should be considered and 2) Some gloves will lose certain benefits and characteristics with each wash. Please refer to the glove manufacturer for washing limits and instructions on care, and be sure to inspect your gloves after each wash cycle, ensuring they will provide the same level of protection as when first used). Launderability of a glove and whether it is ambidextrous or not can also become a factor for those companies who attempt to minimize waste. By adding life to the gloves via machine/hand washing or the simple switching the glove from left to right hand usage, companies can help minimize their waste footprint as well.

The Same But Different

The true costs of a glove are going to vary from company to company and even person to person. Some companies, even if they are in the same type of industry, will cycle through gloves at different rates for a variety of reasons. From different weather environments and worksite requirements to the pride employees take in their safety gear and unaccounted for usage, you should always conduct a site survey that is specific to your company’s requirements prior to deciding on a glove purchase. Having a good understanding of the requirements and demands your work and employees will be putting on their hand protection will help you determine which the best options will be. Most suppliers, including Ritz Safety, are happy to provide these site surveys either on their own or with the partnership of a trusted glove manufacturer. In many cases, bringing in a representative of the glove or gloves you are considering, will also help you better understand the best options, as they may see things that could require a different type of glove feature or style.

Making the Decision

So when the time comes to make a decision on the hand protection for your workforce, be sure that you are looking at the many other factors presented with the purchase and not simply cost alone. As companies continue attempting to keep costs low and get the most out of every purchase, sometimes higher up-front costs will actually lead to lower overall costs in the end. Taking time to properly assess all the factors related to your glove needs will help you determine the true costs of that $8 or $12 glove purchase.

References: *”The Considered Purchase Decision: What Matters, What Doesn’t, And What It Means for B2B Marketing and Sales”; TriComB2b in partnership with the University of Dayton School of Business Administration, 2013. http://www.tricomb2b.com/sites/default/files/sites/default/files/uploads/TriComB2B-UD_Research_Report-2013.pdf

**Glove models utilized during testing: 1) PIP 19-D622. 2) PIP 39-C122. 3) PIP 39-C1300. 4) PIP 39-1310. 5) PIP 34-800.

Ritz Safety, an international distributor for a broad range of personal protective equipment, opened it’s doors in 1983. With nine locations throughout the United States, Ritz Safety has a location near you, with 24/7 ordering capabilities also available at www.RitzSafety.com. Please contact us directly at (800) 451-3077 or Sales@RitzSafety.com with questions or to place an order.

 Additional article information was provided by Protective Industrial Products, one of Ritz Safety’s key partners in providing cutting-edge safety equipment. PIP has been an independently owned supplier of consumable personal protective equipment to industrial distribution for over 30 years.

The Real Cost of Cuts

This post was provided by Slice, one of Ritz Safety’s key partners in providing cutting-edge safety equipment.

They say you can’t put a price on safety, but if you’re in charge of safety budgets, you know that’s not true. When it’s time to equip or replace your company’s safety gear, the cost is spelled out in neat columns on your spreadsheet. Here you move numbers around, trying this trick or that to ensure that expenditure numbers match budget numbers and you’re in the black. After all, you don’t want to spend more than you have to. However, this approach only considers one part of the equation. If your calculations don’t account for the price of injuries, you’re not getting the whole picture.

Cuts: Leading Workplace Injury

To illustrate, consider one of the most common workplace injuries: cuts to the hand. A 2008 government study1 found that wrist and hand injuries were the number one cause of work-related emergency hospital admissions in Australia, for example. The majority of those injuries were lacerations–or cuts–ranging from minor wounds to amputations.

Costs of Treatment, Insurance and Fines

Hands are complex structures, full of delicate bones and an intricate network of ligaments and muscles. Their remarkable makeup is why hands are capable of so many intricate tasks and also to blame for why healing can take a while and treatment can be expensive. Every time a worker sustains a cut, the associated costs start adding up. Even a small cut in the wrong place can do irreparable, life-changing damage to somebody’s hand.

These costs start in the emergency department, where bandages, stitches and even surgery may be necessary. After emergency care comes rehabilitation costs and compensation for time off work.

Insurance may cover the expenses, but you’ll pay the price in higher premiums. If your business has an insurance policy that minimizes premiums, such as a Large Deductible Workers Compensation policy, you’ll still have to reimburse all expenses out of pocket up to a very large deductible, frequently $100,000 to $1,000,0002. That’s the kind of surprise cost no one likes.

If you skimp on safety precautions like cut protection, you may also be looking at an OSHA fine. Keep in mind that these fines will be going up3 considerably in 2016. Don’t forget the intangible, but very real, price to your company’s reputation: violations stay on record for consideration in future citations and can affect whether you’ll be able to attract in-demand workers.

Last But Not Least: Lost Productivity

Aside from more obvious direct costs to the employer, a worker out of production will inevitably cost you in terms of reduced overall productivity. Sure, you can hire a replacement, but there are going to be costs associated with training. Even if you onboard a quick study, you’re guaranteed to lose some capacity. Keep in mind that a decrease of efficiency at one position has a butterfly effect; each injury affects other workers’ morale and productivity. Even if you don’t hire a replacement, you’ll likely have to adjust shifts, requiring extra labor or overtime costs.

Before finalizing your safety budget, make sure you account for the real price of injuries. When you include hospital fees, recuperation costs, time-off compensation, insurance costs, government fines, lost productivity, training for replacements and lowered morale, the picture becomes a lot clearer. Upfront costs like cut protection pale in comparison to the real price of injuries. Prevention, such as safety cutters and protective gear, coupled with a strong pro-safety message, is the smart choice for safety’s sake and your company’s bottom line.


1 Work-Related Hand and Wrist Injuries in Australia. (2008). Retrieved from http://www.safeworkaustralia.gov.au/sites/SWA/about/Publications/Documents/202/WorkRelatedHandandWristInjuriesinAustralia_2008_PDF.pdf

2 From http://www.hg.org/article.asp?id=29700

3 From http://www.safetyandhealthmagazine.com/articles/13258-osha-fines-to-increase-significantly


Distributed in 30+ countries, Slice cutting tools are used by more than half the Fortune 1000 to reduce injuries and lower costs by replacing dangerous metal blades with patented Slice ceramic-blades. With tens of millions of units sold world-wide, Slice is making cutting better, safer and more exciting by integrating new technology and visionary functionality and design. Learn more about Slice and how it supports Autism research at www.sliceproducts.com.

Is Your Workplace GHS Compliant?

OSHA’s updated Hazard Communication Standard rule changes go into effect on June 1, 2016.  Will your workplace be compliant with the new GHS labeling standards by then?

The Globally Harmonized System (GHS) is an international standard for communicating the hazards present in chemicals.  Effective June 1, all workplace labeling must be replaced by GHS pictograms, and employees must be trained to recognize the new communication standards.

There is still time to make your workplace compliant!  Contact us today for help with the transition, or you can purchase GHS compliant labels and new SDS booklets on our website.

Time is running out – make sure your workplace is in compliance today!

More information on the new Hazard Communication Standard:
OSHA Hazard Communication Standard
Background on the switch to GHS
GHS Fact Sheet

No Rental Job is Too Big

Spring is the prime time for many manufacturers to schedule maintenance and plant shutdowns, and Ritz Safety stands ready to meet these unique needs through our Ritz Rents team.

Rental-TruckRental-SCBAs

Ritz Safety Mobile recently delivered over 200 rental items to a single customer, to support an extended plant shutdown. Inspecting, maintaining and shipping out such a large order is just a normal part of life during the Spring for our extraordinary team in Mobile, led by Rental and Service Manager, Andrew Davis. Davis said “Taking advantage of good weather windows is critical to keeping down times to a minimum. That’s why Spring is the most desirable time for plant maintenance, refits and expansions.”

Ritz Safety rents equipment suited to any need, including confined space entry, fall protection and rescue, gas detection, SCBAs and escape breathing apparatus, respiratory protection and ventilation. And all items are calibrated and safety checked prior to rental by factory-trained service technicians.

Contact us for more information about our rental equipment, or to schedule a rental!

Dayton-based Ritz Safety acquires Slate Rock Safety

Dayton, Ohio based Ritz Safety LLC is excited to announce the acquisition of Slate Rock Safety. Slate Rock Safety occupies a unique role in the safety market, as an industry-leading ecommerce retailer and distributor of flame resistant work apparel and other personal protective equipment, serving local customers in the Cleveland area and a wide variety of national accounts across the country. This marks the third strategic acquisition in the past year for Ritz Safety, after acquiring Mobile, Alabama based Safety Source Inc. in July of 2015 and Portland, Oregon based Public Works Supply Inc. on May 1, 2016.

Ken Fisher, President of Ritz Safety, said “Continuing our nationwide expansion and offering additional safety related products and services, equipment rental and repair, and training was a strategic initiative for Ritz Safety. We are excited with our Midwest expansion and the added e-commerce capability Slate Rock Safety brings to Ritz Safety and its 5000+ customers.  Our customers expect multiple sales channels to meet their safety needs and Ritz Safety is working hard to deliver those solutions on the web, with outside and inside sales experts, and with customer friendly retail store fronts.” Ritz Safety is further expanding its Midwest footprint with a new, state-of-the-art facility in Indianapolis, Indiana. The recently renovated building provides four times the warehouse and showroom space of the previous Indianapolis facility, and will offer one of the largest PPE showrooms in Central Indiana. Ritz Safety’s new Indianapolis branch is located at 3330 Shadeland Avenue.

Ritz Safety began in 1983 as a family-owned business in Pompano Beach, Florida.  Over the past 10 years, Ritz Safety has grown into a respected, international distributor with over 150 employees nationwide.  Ritz Safety maintains corporate offices in Dayton, Ohio and operates ten retail/wholesale distribution centers, in Pompano Beach, Tampa and Jacksonville, Florida; Medina, Ohio; Indianapolis, Indiana; Mobile, Alabama; Houston, Texas; Las Vegas, Nevada and Portland, Oregon.  Ritz Safety services over 5,000 national and international customers monthly, and stocks over 25,000 safety products.  For more information, please visit www.ritzsafety.com

Coming Soon…a New Premier Safety Supply Facility in Indianapolis!

Ritz Safety Announces Expansion of Indianapolis Location

New Indy Mockup Crop V3
Artist’s Rendering

Due to five straight years of double-digit growth in Indianapolis, Ritz Safety is expanding to a new facility four times the size of our current location! This is the second expansion for Ritz Safety in four years in Indianapolis.

New Indy MapThe new facility, currently being renovated, will be located at the corner of 34th Street and Shadeland Avenue, just 1.1 miles north of the current building. The expansion will allow Ritz Safety to carry additional product lines in Indianapolis, such as safety boots by Timberland, Wolverine and Thorogood as well as expanding on current brands such as Carhartt, DBI/Sala, Honeywell, Global Glove, Scott Safety, 3M and more. We also expect to open a new confined space rental and repair department in Indianapolis, featuring products by MSA and Scott Safety, and rental and calibration services for a select group of gas detection products.

The expanded warehouse space will provide much needed relief for the growing distribution needs of the entire company. Executive Vice President Chris Kimmet said, “Expanding in Indianapolis was a strategic move we thought would be necessary 2-3 years from now. Fortunately for us, our performance in this market and the loyalty of our customers forced us to move much faster than anticipated.”

Our new, 5,000 square foot showroom will be one of the largest PPE showrooms in Central Indiana, featuring interactive product displays, a Boot Wall with 40+ of the hottest brands and styles and hundreds of examples of the latest PPE on display. Our new facility will also feature a large, state-of-the-art training room for in-house product and manufacturer safety sessions.

Check here for updates on our new facility! And, while we are renovating, stop by our current location at 6321 East 30th Street, for moving sale specials!

“Don’t Be That Driver” – National Work Zone Awareness Week

Close your eyes for a second, and picture your desk, complete with the photos of your loved ones, your computer, phone, and everything else necessary to get your job done. Now, envision that same desk located on the shoulder of a busy interstate with cars, trucks and tractor-trailers flying past at highway speeds. Now imagine yourself sitting at that desk and working every day – knowing in your mind that, without warning, you could suddenly be struck by a careless driver or out-of-control vehicle. Just the thought of it makes you cringe, doesn’t it?Desk Side of Road

This is the reality for thousands of people who work in construction traffic zones every day. These are some of the most dangerous jobsites that exist and the workers are always one step away from being injured or killed by traffic.

Distracted driving is a leading cause of accidents and traffic fatalities, and the danger only increases when passing through a work zone. Drivers who are distracted by eating, grooming or using a mobile device are more likely to injure or kill themselves or workers on the roads. Shouldn’t we be willing to slow down and pay attention as we drive through their “office?”

The 2016 National Work Zone Awareness Week, April 11 – 15, aims to raise awareness of the dangers of distracted driving, and specifically driving through work zones. Work zone safety affects everyone, in every industry, so many federal, state and other agencies, as well as Ritz Safety, are encouraging participation in National Work Zone Safety Week.

How can you get involved?

Please join Ritz Safety in promoting work zone safety April 11 – 15. Click here for more information from the US Department of Transportation.

Cut Injuries Costing You?

Have you ever considered the cost of unsafe cutting tools in the workplace? Knife-related employee injuries are all to common, yet often avoidable with proper use of safety cutters. The following information comes from our friends at Slice (original post here).

The Cost of Not Using Safety Knives

CostOfKnifeInjuries-Slice

How much does it cost your company if one of your employees suffers a simple knife-related injury on the job?

a. $1,000
b. $10,000
c. $50,000 or more

Factor in medical attention, sick pay, lost work time, fines, delays, and insurance costs. The National Safety Council estimates the average total incurred cost per workers’ comp claim for hand, finger, and wrist injuries is more than $19,000. OSHA says direct and indirect costs for laceration injuries total $36,472.

And those are average costs, so knife-related injuries can easily top $50,000 and beyond.

Yet knives are a standard part of industrial workspace —utility knives, razor blades, box cutters, craft blades and more. Employees use them to cut cable, plastic, paper, tear through packages, open boxes, unpack deliveries, unload stock, trim, slice, and more.

If knives are everywhere in the workplace, so is the potential for injury. Cutting injuries send more than 1,000,000 workers to the hospital every year. According to a study on reducing knife injuries conducted by the UK’s Health and Safety Executive, 51% of knife injuries were finger related, 33% were hand related, and 5% were arm related. That’s a massive 89% on the upper limbs!

Preventing Lacerations

You can dramatically reduce knife-related accidents and injuries in your workplace, improve the safety of your employees, and protect your company’s bottom line by implementing Safety Knife Programs and implementing Safety Knives and Safety Box Cutters to reduce lacerations.

We’ve put together a free paper on The Top 3 Things You Can Do NOW to Reduce Cutting Injuries. Download it now by clicking on the below link.

This post was provided by Slice, one of Ritz Safety’s key partners in providing cutting-edge safety equipment. Distributed in 30+ countries, Slice cutting tools are used by more than half the Fortune 1000 to reduce injuries and lower costs by replacing dangerous metal blades with patented Slice ceramic-blades. With tens of millions of units sold world-wide, Slice is making cutting better, safer and more exciting by integrating new technology and visionary functionality and design.

Ritz Safety Purchases Safety Source Inc

On July 1, 2015, Ritz Safety purchased the assets and business of Safety Source Incorporated, based in Mobile, AL. Safety Source’s operations include two sales and distribution centers providingindustry-leading safety solutions, products and services. Safety Source Inc. is a regional leader in the industrial safety supplies industry, with a rich history of serving the Gulf Coast for over 20 years.SSI Logo

Ritz Safety’s purchase of Safety Source Inc. will continue to position the combined organization as a local, regional, and national supplier to the industrial, agriculture, construction, mining, manufacturing, service, waste, oil and gas, ship building, and other industries who are looking for assistance and consistency in keeping their employees safe. The two Safety Source Inc. facilities will continue to operate under the Safety Source name during the transition. The acquisition brings the total number of Ritz Safety sales and distribution centers to eight.